|
|
|
|
UHF Tags & Inlets
These tags and inlets are compatible with all IPICO UHF readers and share the following key features:
- Available for European, USA, AUS & RSA spectrum allocations
- Robust anti-collision protocol -- up to 240 tags can be read simultaneously
- Fast moving tags can be read -- up to 300 km/h
- High tag read rate -- about 200 tags/sec in a multi-read applications
- High tag data transmission rate -- up to 256 kbit/sec
- Frequency independent chip
- Passive, no battery
All these tags and inlets are available in 5 versions or speed grades for all enclosure formats and frequencies.
|
|
|
|
|
Bare inlet with optional adhesive strip
Use where medium range, multi-read, high-speed item identification is required: SCM, transport management, textiles, asset management, document or baggage management, plastic container management, carton packaging.
2-20 m depending on reader power output and configuration
These are passive tags with no battery. The chip is attached to a printed antenna on flexible substrate. Tag can be customized.
110 x 10 x 0.3 mm with optional adhesive strip and chip glob-top
|
DOWNLOAD
DATA SHEET
|
|
|
|
|
|
Transparent, adhesive strip for windscreen
Use where long range, multi-read, high-speed item identification is required: specifically transport management.
2-7 m depending on reader power output and configuration
The tag is a glob-topped chip on a flexible transparent printed antenna substrate with an adhesive strip for windscreen mounting. Tag is tamper-proof to prevent removal of the intact tag. Tag can be customized.
170 x 10 x 0.1 mm with adhesive strip; custom size can be developed on request
|
DOWNLOAD
DATA SHEET
|
|
|
|
|
|
Transparent, adhesive strip for windscreen
Use where long range, multi-read, high-speed item identification is required: specifically transport management.
2-7 m depending on reader power output and configuration
4 m write range
The tag is the same as the Read-Only ENP Tag but with the write capability. Pages can be locked after writing. Tag can be customized.
170 x 10 x 0.1 mm with adhesive strip; custom size can be developed on request
|
DOWNLOAD
DATA SHEET
|
|
|
|
|
|
BiT Intermodal Seal is used to secure ocean containers, trailers, rail cars, air cargo and other containers in the same way as a traditional seal, without any special training being necessary for its use.
2-8 m depending on reader power output and configuration
BiT Intermodal Seal is used in applications where long range, multi-read, high-speed container identification, tamper evidence and authentication are required
215 x 26 x 26 mm (Pin diam 9.5mm); mass 56 g
|
DOWNLOAD
DATA SHEET
|
|
|
|
 |
Use where long range, multi-read, high-speed item identification is required: SCM, transport management, marine applications, access control and asset control, industrial (machines, process control).
2-20 m depending on reader power output and configuration
The tag includes a chip attached to a printed antenna above a conducting ground plane which renders the tag independent of the surface to which it is attached. The housing is made of UV resistant ABS. Tag can be customized.
235 x 45 x 30 mm
|
DOWNLOAD
DATA SHEET
|
|
|
|
 |
Use where long range, multi-read, high-speed item identification is required: transport management (especially railways), marine applications, access control and asset control, industrial (machines, process control).
2-10 m depending on reader power output and configuration
The tag includes a chip attached to a printed antenna enclosed within a UV resistant ABS housing. Unlike the Industrial Vehicle Tag, it does not contain a conducting ground plane, and so must be mounted on a metal surface for best performance. The tag can be customized.
236 x 35 x 18 mm
|
DATA SHEET |
|
