UHF Tags

IP-X Ultra High Frequency RFID tags

These tags are compatible with all IPICO UHF readers 




     UHF On-Metal Tag

Frequency:
869 to 915 MHz

Range:
1-12 m depending on reader power output and configuration

Description:
A durable passive tag for superior read ranges in multi-read low and high speed applications. Designed specifically for installation directly onto metal surfaces – can also be used with a metal reflector back plate for installation onto non-metallic surfaces. Typical applicationsinclude:
- Transport Management (Railway Rolling stock, industrial vehicles)
- EVI applications
- Marine applications 
- Access control and asset control
- Industrial, heavy duty applications (machines, process control)

Size: 
236L x 35W x 18D mm

DATASHEET



UHF Wintag

Frequency:
869 to 915 MHz

Range:
1-12 m depending on reader power output and configuration

Description:
A thin sticker type passive tag for interior windscreen mounting for EVI applications where long range, multi-read, high-speed vehicle identification is required. The tag uses a chip containing a pre-programmed 64-bit unique ID code and 14 x 64-bit lockable pages of user EEPROM data. When powered up by the reader RF beam, the tag spontaneously transmits its ID code, and if configured for “TTO mode”, its ID is followed contiguously by 1 or more other selected pages of user EEPROM. These pages can be written to, read, and locked by reader commands to the tag. Data integrity can be assured by appending CRCs to the data, and authenticity can be guaranteed by writing encrypted data into one or more memory pages. This tag is ideally suited to transport management, and was specifically designed for windscreen attachment.

Size:
124L x 35W x 0.35D (incl. Release liner)

DATASHEET



UHF CR80 Tag

Frequency:
869 to 915 MHz

Range:
0.1-3 m depending on reader power output and configuration

Description:
IPICO’s Read/Write UHF RFID laminated CR80 tag for access control applications. The tag uses a chip containing a pre-programmed 64-bit unique ID code and 14 x 64-bit lockable pages of user EEPROM data. When powered up by the reader RF beam, the tag spontaneously transmits its ID code, and if configured for “TTO mode”, its ID is followed contiguously by 1 or more other selected pages of user EEPROM. These pages can be written to, read, and locked by reader commands to the tag. Data integrity can be assured by appending CRCs to the data, and authenticity can be guaranteed by writing encrypted data into one or more memory pages.

Size: 
86L x 54W x 0.8D mm

DATASHEET