UHF Readers

IP-X Ultra High Frequency RFID Readers




 

Read/Write UHF Registration Reader

Frequency:
13.56 MHz

Description:
The Registration Reader is used mainly for testing UHF tags and recording their factory-set 64-bit ID codes or as a desktop registration or validation reader. It connects with a PC or other device which controls when the RF unit transmits and records tag ID data. USB interface allows reader to be powered by the host. RS422 interface allows for integration with industrial control systems.

Size:
128L x 116 W x 25 H mm



DOWNLOAD
DATA SHEET




Read/Write UHF Access Control Reader

Frequency:
13.56 MHz

Description:
The Access Control Reader seamlessly integrates to a wide range of commercial/industrial Access Control systems via 5 wire Wiegan interface. The bi-directional RS422 interface allows for integration into industrial control systems.

Size:
107L x 51 W x 22H mm

DOWNLOAD
DATA SHEET




 

UHF Handheld Read/Write Reader

Range:
Up to 4.5 m depending on tag type and environmental conditions

Frequency:
USA: 902-928 MHz band; South Africa: Fixed Freq at 921 MHz
EUR: 865-868 MHz band; Other: On request.

Description:
Reader consists of an integrated antenna, RF Unit, rechargeable/replaceable battery. Data communication between reader and application host (typically any PDA) is done by BluetoothTM (Class II) or WiFi 802.11 b/g. Software maintenance can also be carried out via an USB port. The complete reader is integrated into an ergonomically shaped ABS housing and allows the user to do remote registration and inventory control and process the data in real time.
Onboard Memory and Real Time Clock capability allows for off-line data processing. The reader can write to and read from all pages of a Read/Write tag (using appropriate reader commands), and can read user data from tags configured in “TTO**” mode.

Size:
200W x 190H x 110D mm



DOWNLOAD
DATA SHEET




UHF High Performance EVI Reader

Range:
Long range up to 20 m depending on TX power and tag type

Frequency:
This UHF High Performance reader is available in a wide range of power and frequency versions, and complies with ETSI (Europe) and FCC (USA) standards. The power level can be set to any value from 0.1 W to 8 W EIRP (EVI reader) or 5W EIRP (all other readers), and the frequency from 860 to 960 MHz, fixed or hopping.  Some typical settings are:
● 4 W EIRP frequency-hopping in the 902 – 928 MHz ISM band – (USA and some South American countries)
● 1 W EIRP frequency-hopping in the 902 – 928 MHz ISM band (Australia)
● 500 mW ERP fixed frequency in the 869.4 - 869.65 MHz band (Europe)
● 4 W EIRP fixed frequency at 915.3 MHz (South Africa)

Description:
These readers can read both Read-only and Read/Write tags, can read all the data pages transmitted by tags operating in “TTO**” mode, and perform all read, write, and control functions pertaining to the operation of Read/Write tags.

The standard data output is RS232 with programmable baud rate and flow control. Optional outputs include RS485, Ethernet, and Wiegand with RS232. All received IDs are date- and time-stamped in the reader. Supply is either from 12VDC or 90 - 264VAC.

The antennas used are circularly polarized so that tags may be in any orientation. This reader is also available with linearly polarised antennas specially suited for Electronic Vehicle Identification (EVI) purposes. Two versions of the “EVI***” reader is available: (1) Ethernet for normal traffic monitoring, and (2) RS232 with Wiegand connection for access control.

Size:
805 L x 60 H x 305 W mm; size does not include the 2 pole-mounting brackets for poles <60 mm diameter



DOWNLOAD
DATA SHEET




UHF Single Antenna Reader

Power/Frequency:
The power level is factory set to any value up to 2W ERP, and the frequency from 860 to 960 MHz, fixed or hopping.

Description:
The UHF Single Antenna Reader can be configured in a wide range of power and frequency settings, and complies with ETSI (Europe) and FCC (USA) standards. The power level is factory set from 0.1 W to 2 W ERP, and the frequency from 860 to 960 MHz, fixed or hopping.

The data output is Ethernet/RS422/RS232 and Wiegand(26/34bit) and is set internally by connecting the cable ends to the appropriate connection points for the desired output format. All valid IDs received are date- and time-stamped in the reader, and immediately output via the cable.

Power supply is external 12 VDC.

This reader can read both Read-only and Read/Write tags, can read all the data pages transmitted by tags operating in “TTO**” mode, and perform all read, write, and control functions associated with the operation of Read/Write tags.

The antenna used is linearly polarized, and for best results the tags should be aligned parallel to the short axis of the reader.

The Readers are shipped without a connecting cable, which must be provided by the user, and attached to the relevant connector points depending on the required I/O format.

Size:
320W x 200L x 100H mm; size does not include the 2 pole-mounting brackets for poles <50 mm diameter


DOWNLOAD
DATA SHEET